Tier IV Final Portable GenSet
The new QAS 25 generator from Atlas Copco is equipped with an Isuzu
4LE engine and a Diesel Oxidation Catalyst (DOC) to achieve Tier 4 Final
The unit’s enclosure is sound attenuated and has a vertical radiator and
exhaust discharge to ensure low dB(A) levels for use on noise-sensitive
jobsites, residential areas or at events. A voltage selector switch allows
operators to adjust the machine’s output to 480 and 208/240 volt 3-phase
settings as well as 120/240 volt single phase for varying applications and
The QAS 25 comes equipped with an optional trailer with robust tie-downs for trans-
port on a flatbed. Skid units contain fork pockets for forklift transfer.
•Atlas Copco Portable Energy
The new Gehl R Series Radial-Lift
Skid Steer Loaders comprises three
models – the R190, the R220 and
the R260. The company say that the
key features include an enhanced
operator station with an integrated
digital display, improved visibility
all-around, Tier IV engines and a
high-powered hydraulic system.
The radial-lift skid steer loaders
fall into the large-frame category.
Optional counterweights can be fit-
ted to increase the rated operating
capacity from 957 kg on the R190 to 1261 kg on the
R260. Lift heights reach up to 3061 mm on the R190
and 3124 mm on the R220 and R260.
The new series come equipped with high-pow-
ered auxiliary hydraulics with excellent flow ratings
and precise control. Flow rates achieved are from
119 L/min on the R190 to 132.5 L/min on the R220
and R260 with the high-flow configuration.
Impressive breakout forces deliver optimal han-
dling and lifting performance. Faster cycle times
further increase productivity on the jobsite.
The operator’s compartment has a new side-
folding restraint bar and armrests with multiple ad-
justments to enhance operator comfort and safety.
Joystick and hand/foot controls are fully adjustable
and the mechanical or air-ride suspension seat op-
tions deliver a high degree of comfort. The forward
position of the cab and lower rear towers deliver
improved visibility to the bucket edge and to the
rear of the machine.
Auxiliary hydraulic controls are locat-
ed on the joystick in all configurations for
easy access. A customisable digital dis-
play provides coolant, fuel, battery, en-
vironmental, engine regeneration infor-
mation and other features in real time.
Pressure-relieving hydraulic couplers
make attachment changes simple and
safe. Excellent service access is achieved through
the extra-wide rear door and engine hood. The
ROPS/FOPS structure tilts back with the aid of gas
struts, giving access to hydraulic components. In
addition, all high-rotation pins have grease points
for ease of maintenance and quiet operation.
These new skid steer loaders also include other
features such as the manual ‘Quick-a-Tach’ or hy-
draulic ‘Power-a-Tach’ attachment systems, Hydra-
Glide ride control and the Hyraloc safety system.
Gehl R Series Radial-Lift
Skid Steer Loaders
R190 R220 R260
Height to Pin Fully Raised mm
68.4 hp 70.7 hp 70.7 hp
Rated Operating Capacity (KG)
Operating Weight(Approx) KG
Specifications will vary according to configuration
Contractors World UK & Ireland Vol 4 No 4
What’s New - Plant & Equipment